3 Level Warehouse Ladders (B301)
A “3-level warehouse ladder” typically refers to a ladder designed for use in a warehouse or industrial setting that has three levels or steps.
These ladders are commonly used to reach elevated areas in a warehouse where items are stored on shelves or racks.
The specific design and features of a 3-level warehouse ladder can vary.
Adjustable U-Head Jack
A jacking technique that can be employed at the top or bottom of a scaffold structure
and support a load of up to 57 KN/m2 is the 500mm screw jack.
Cup-lock ledgers
The horizontal part of the cup lock system is made up of cup-lock ledgers. To prevent site injury,
each features forged blade ends with the least amount of projection.
They can be found in the bottom cups of the standards and in the position of the matching top cup.
Cup-lock standards
Cup-lock scaffolding is a popular modular scaffold system characterized by the use of unique cup-shaped connectors.
These cup-like components allow for the easy and fast assembly of vertical and horizontal members,
providing a secure and stable structure. In the context of cup-lock scaffolding,
“standards” refer to the vertical components or uprights that make up the main vertical support of the scaffold. Here are some key points about cup-lock standards
Decking Beam
1.The lightweight steel used to construct decking beams includes a 100mm wide top flange that does away with the need for a plywood inlay.
2. This lowers the expense of maintenance. Securing heavy-duty pressings to the ends of the beams ensures sufficient safety against mishaps.
3. It is a structural component that supports the weight of the materials used to build the deck. The decking beam is supported by normal verticals or movable props on both ends.
4. The 2 mm and 2.5 mm steel sheets used to make these beams are bent into a box shape and strengthened with a lattice constructed of steel rods.
Dual Purpose Warehouse Ladder (B306)
A dual-side warehouse ladder typically refers to a type of ladder that provides access from both sides, allowing users to climb up or down from either direction. These ladders are commonly used in warehouse and industrial settings where accessibility to elevated storage areas, shelves, or racks is required.
Formwork for Heavy Vehicle Maintenance & Access (B308)
Formwork in the context of heavy vehicle maintenance and access typically refers to the temporary molds or structures used to support and shape concrete or other materials when constructing ramps, platforms, or structures for servicing and maintaining heavy vehicles. The formwork helps create a specific shape or structure that can withstand the weight and requirements of heavy vehicles.
H20 Beam
A wooden beam used for formwork has three layers in the center part and two upper and lower wings. Prefabricated timber Formwork H20 Beams come in a variety of sizes. long-lasting and resistant to harsh treatment and excessive use. The foundation of many formwork systems is H20 timber formwork beams.
Durability and Security Cost-effective
Used several times. good balance between cost and utility. Simple storage.
Flexibility in construction
Perfect for using a three-layer board. Anywhere along the beam could be a cut. At any time, supports can be positioned in between beams. Suitable for all types of formwork.
Infill Beam
The purpose of the infill beams is to support plywood decking transoms when used in conjunction with the decking beams. With the conventional sizes, the wide top provides additional support for the plywood.
1. The infill beams are available in four lengths to enable grid size flexibility to accommodate various slab types.
2. This secondary piece is supported by the decking beams and is positioned at a right angle to them.
3. To support the concrete that is poured, ply forms—steel forms—are positioned on top.
Single & Double Push pull Props
It is FITTED at the steel soldier’s rear face.It is made up of two nuts, a base adaptor, an outer and inner pipe, a sleeve, and a locking pin.
The steel soldier’s back face is fitted with it. It is made up of a base adaptor, two nuts, a sleeve, an outer and inner pipe, and a locking pin.
Tank Ladder Aluminium (Cantilever Design) (B320)
Cantilever tank ladders make it easier to access sectional tanks by giving the user a secure, stable way to reach the water tank for maintenance, inspection, and tank control adjustment. A fixed access system adheres to working at heights rules, helps avoid falls and other workplace mishaps, and discourages the use of other, forbidden ways of access. When a prompt response is needed, the availability of fitting external and internal ladders facilitates easy access to the tank.
Warehouse Ladder (B321)
When you need to lift and lower heavy objects, a warehouse ladder comes in helpful. You can climb safely toward and away from your ladder while using a stair-type ladder. For user stability and safety, handrails are positioned both above and below. Your ladder will move around thanks to the included casters. Rolling warehouse ladders with four to sixteen steps that have treads on each are available.
Materials
The material used to make warehouse ladders is aluminum profile. The primary benefits of aluminum over steel are its less weight, resistance to corrosion, and suitability for use in chemical and food processing facilities.
Perfect for applications involving frequent stock picking
Everything is welded together.
Extra wide treads for increased longevity
Three sides with handrails 90 cm high to comply with Work Cover regulations
Standard equipment includes a safety gate.
Heavy Duty Industrial Load Rating of 150 kg
Unmarked casting. movable brake system with two pedals.
both robust and light.
Warehouse Ladder Extended Dual Side (B322)
A “Warehouse Ladder Extended Dual Side” likely refers to an industrial ladder designed for use in warehouses, and it incorporates both extended platforms and dual-sided access. This type of ladder is well-suited for environments where workers need to access elevated storage areas, shelves, or racks from both sides, and also require an extended platform for tasks.
Warehouse Ladder with extended Platform (B223)
A warehouse ladder with an extended platform typically refers to a type of industrial ladder that includes an extended working platform at the top. This design is often used in warehouses and distribution centers where workers need a stable and secure surface to perform tasks at elevated heights, such as picking items from shelves or organizing inventory.